Air Conditioning
Standard Air Handling Unit
ECOAIR Air Handling Units are manufactured in modular sections and various configurations are available. Air handling unit - Inline type, either chilled water or Dx units. Air handling unit with energy recovery components such as Heat recovery wheels, Plate heat exchangers, or Heat pipe heat recovery Units can be supplied with an entire range of panel configurations to suit every application. Different sectional arrangements and fan discharge positions are possible depending on the site constraints and requirements. ECOAIR units are with thermal break system applied for both panels and frames.
Models
- EAES Series
Standard Air Handling Unit
Specifications
Casing is made of 0.9mm thick plain GI sheet inner & powder coated GI sheet Outer
Casing Double skin construction with insulation Rockwool / PU Foam / Fiberglass
Unit frame is made of 2.0mm high strength extruded aluminum pentapost and internal post
Air Flow Range: 1000 m³/h to 85,000 m³/h
Fan model are compliance with AMCA 210 & 300 standards
Manufacturing Standards: ISO 9001 / 14001 / 45001
Aluminum Profile: The unit frame is constructed of extruded aluminum profiles with
Sandwiched Panels: The air handling unit’s enclosure is made up of sandwiched
panels with insulation material, either polyurethane foam insulation or rockwool
insulation, to ensure excellent thermal and sound insulation.
Heat Transfer Coils: Coils that include variable fin spacing, copper tube
thickness, and a variety of casing and fin materials, including galvanized and stainless steel casings. Protective coatings and treatments are available to extend the service life
of coils installed in corrosive atmospheres
Drain Pan: The coil section is provided with an insulated drain pan made of
stainless steel for collecting the condensation
Air Filtration: Prefilters G2, G3, G4 grades, Medium & Fine Filters M5 to F9 grades, EPA & HEPA Filters H10 – H14 graded, Gas Phase Filters,
Fan: DIDW Centrifugal belt driven fan, Plenum Fans, he operating limit is set according to the requirements of class I, II, and III limits as defined in AMCA Standard 99. All wheels are statically and dynamically balanced to ISO 1940 and AMCA 204-G2.5 standards.
EC Fans: single-inlet centrifugal impeller with high-efficiency backward-curved blades and an external rotor EC (Electronically Commutated) motor
Motor: Motors are totally enclosed fan-cooled (TEFC), foot-mounted, continuous duty type, IP55 protected, and have class F insulation. Rating and operating characteristics are in accordance with IE60034 standards. As standard, IE2 efficiency motors are supplied along with the unit; upon request, IE3 motors and Class H motors shall be provided. All the motors are equipped with an adjustable motor base plate for adjusting the belt tension
Coil performance is certified in accordance with AHRI 410 standard.
Fan models are in accordance with AMCA standard 99-0098-76 R20